Baggs ACCESSORIES:
STEREO Y CABLE STRAPJACK PLUS BUFFER JACK
Stereo Y Cable and X-Bridge accessory: Use this 15' pro quality cable with metal plugs to get the best tone out of both channels from your X-Bridge set-up. This cable has a stereo plug on one end and splits off into two mono plugs at the other end, one for each signal. The mags will be on the "tip" and the X-Bridge will be on the "ring". Each signal will require its own individual channel, even in a combo amp. (List: 49.50) PRICE: $35.00
|
Eliminates
Mic/Pickup Crosstalk Eliminates Batteries On Your Guitar Forever*
Preserves the Fidelity of Your Pickup
Designed to work with the Mixpro the new Buffer Jack will allow
you to run a passive pickup and a mini-mic, side by side down any length of stereo cable without
any crosstalk, or bleed from the mic into the pickup signal. The Buffer Jack its
power from the Mixpro, or any outboard stereo preamp with 9V "phantom"
power available on the tip channel. So it also gets rid of those obnoxious onboard
batteries.
The circuit itself buffers any high impedance piezo pickup, such as the Ribbon Transducer, and sends a low impedance pickup signal out of the guitar. This low impedance signal is immune to crosstalk from the already low impedance mic signal. Basically the outboard preamp thinks that it is seeing two low impedance mics. The series signal path consists of only a single hand selected FET and runs in pure Class A for the ultimate in sweetness, clarity and low noise.
* When used with any outboard mixing preamp with 9V Phantom power such as the LR Baggs Mixpro.
This jack is designed to be used specifically with a Baggs Mixpro. Professional installation recommended.
. (List: $39.00)
PRICE: $29.95
